Cabinet Connector Screw 30mm to 39mm Kitchen Units Wardrobes Cupboards Beige Brown White

Details

Cabinet Connector Screw
Joins Kitchen Units Wardrobes Cupboards Together
Capacity 30mm to 39mm

Colours available: Beige Brown White
Picture shows the brown version
Please select colour in the drop down box below
If no selection is made we will post white

Use these cabinet connector screws to firmly hold your
kitchen units  together.
They can also be use to hold multiple wardrobes or Ikea bookshelves together firmly.
This will keep your units neatly in line
and will help to spread any uneven load between cupboards.

To fit the cabinet connector screw:
First clamp the two adjacent units together
to prevent them from moving during fitting.
At the desired position, drill an 8mm hole right through
both carcase sides ( a little break out will be covered by the screw head).
Insert the screw and tighten - please do not over-tighten
as this will strip the threads inside the plastic screw head
and render the connector useless.
It is recommended that you use a minimum of two
connector screws per cabinet pair.
These should be set into the front row of unused shelf peg holes
(drilled out to 8mm) near the top and bottom of the unit.
For maximum strength use two more connector screws at the rear of the cabinet.